Hàng chính hãng - Giá cạnh tranh
Đội ngũ tư vấn âm thanh chuyên nghiệp
Đội ngũ kỹ thuật viên setup chuyên nghiệp
Bảo hành tận nhà trọn đời
Hỗ trợ trả góp qua thẻ
Hỗ trợ đổi mới thu cũ
Giao hàng miễn phí nội thành
Lượt xem: 752
· Product Information Document, English
Arrayable 2 way full range loudspeaker for installation applications
Rotatable Dendritic waveguide with 90? H x 40? V dispersion
600 Watts continuous, 2,400 Watts peak power
Carbon fibre loaded 15" low frequency driver with inside/outside wound coil
Titanium dome 1.4" neodymium motor compression driver
Multiple array configurations for extended coverage
Switchable passive/bi-amp operation for flexibility of use
Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
Multiple internal rigging points allow bracket mount and suspension in any orientation
15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
Architecturally styled powder coated perforated steel mesh grille
Neutrik speakON* NL4 and barrier strip connectors
1 -Year Warranty Program*
Designed and engineered in the U.K.
The 2 way full range TCS152/94 is a switchable passive/bi-amp 15" 2,400 Watt arrayable loudspeaker system that is ideally suited for a wide range of speech and music sound reinforcement applications. The TCS152/94 is designed to work in conjunction with Turbosound loudspeaker management systems, providing optimal FOH performance, as well as offering considerable flexibility to readily adapt to varying venue requirements.
The TCS152/94 arrayable loudspeaker features a carbon fibre loaded 15" low frequency driver with inside/outside wound coil with low mass voice coil for improved transient response, and a titanium dome 1.4" neodymium motor compression driver mounted on a rotatable 90° horizontal by 40° vertical Dendritic waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch. The rear panel connector plate carries Neutrik speakON* NL4 and barrier strip connectors for input and link connections to additional enclosures.
Turbosound’s proprietary HF Dendritic waveguide features multiple hornlets with identical path lengths, which are engineered to provide a flat constant-phase wavefront with a 90° horizontal by 40° vertical dispersion pattern. When the waveguide is rotated 90° from the standard position, a 40° horizontal by 90° vertical dispersion is achieved, making the TCS152/94 ideal for an even broader range of applications.
Finished in a highly durable semi matt black paint, the cabinet is constructed from 15 mm (5⁄8") birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Internal M10 threaded rigging points are provided for suspension in any orientation, or mounting with dedicated brackets – available separately. A dedicated range of fly plates and coupler kits are also available separately for constructing tightly packed custom full-range and subwoofer enclosure arrays for aesthetically pleasing and venue specific coverage requirements.
The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 15" (394 mm) LF driver and one 1.4" (36 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 41 Hz to 18 kHz and within -10 dB from 35 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 90° H x 40° V, rotatable. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 75 Watts continuous, 300 Watts peak, LF: 600 Watts continuous, 2,400 Watts peak; passive: 600 Watts continuous, 2,400 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 97 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be HF: 134 dB, LF: 131 dB; passive: 131 dB. Dimensions: 834 mm high x 473 mm wide x 451 mm deep (32.8" x 18.6" x 17.8"). Net weight: 28.9 kg (63.7 lbs). The loudspeaker system shall be the Turbosound TCS152/94. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.
The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 15" (394 mm) LF driver and one 1.4" (36 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be fl at within ±3 dB from 41 Hz to 18 kHz and within -10 dB from 35 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 90° H x 40° V, rotatable. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 75 Watts continuous, 300 Watts peak, LF: 600 Watts continuous, 2,400 Watts peak; passive: 600 Watts continuous, 2,400 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 97 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be HF: 134 dB, LF: 131 dB; passive: 131 dB. Dimensions: 834 mm high x 473 mm wide x 451 mm deep (32.8" x 18.6" x 17.8"). Net weight: 28.9 kg (63.7 lbs). The loudspeaker system shall be the TURBOSOUND TCS152/94. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.
Frequency Response | 41 Hz - 18 kHz ±3 dB 35 Hz - 20 kHz -10 dB |
Nominal Dispersion | 90° H x 40° V @ -6 dB points, rotatable |
Directivity Factor (Q) | 12.9 |
Directivity Index (DI) | 11.1 |
Power Handling (IEC) | |
Sensitivity | 97 dB (1 W @ 1 m) |
Maximum SPL | |
Impedance | |
Crossover Type | Passive / Bi-amp, switchable |
Components | 1 x 15" (394 mm) LF driver 1 x 1.4" (36 mm) HF compression driver |
Connectors | 1 x Neutrik speakON* NL4 1 x Barrier strip terminals |
Wiring | |
Dimensions (H x W x D) | 834 x 473 x 451 mm (32.8 x 18.6 x 17.8") |
Net Weight | 28.9 kg (63.7 lbs) |
Construction | 15 mm (5/8") birch plywood |
Finish | Semi matt black paint |
Grille | Powder-coated perforated steel |
Flying Hardware | M10 x 9, M8 X 8 Points |
TCS152-FP (WH) fly plate kit for TCS152 TCS-FK1 (WH) inter-cabinet coupler kit for TCS122 or TCS152 TCS-FK2 (WH) inter-cabinet coupler kit for TCS115B with TCS122 or TCS152 |
25.070.000 đ
20.800.000 đ
15.800.000 đ
13.800.000 đ
11.800.000 đ
3.530.000 đ
28.540.000 đ